Recent Publications

Books/Book Chapters

1. Geotechnique, Construction Materials & Environment, Volume 3, Md. Zakaria Hossain & H. M. Shahin, 2013, ISSN 2186-2982, ISBB 978-4-9905-9580-1.

2. Rifaat, S. M., 2012. Street Pattern and Traffic Safety. LAP LAMBERT Academic Publishing GmbH & Co. KG, Germany.

3. New Frontier in Computational Geotechnics, Proceedings of 6th International Workshop on New Frontiers in Computational Geotechnics, Authors – H. M. Shahin, F. Zhang & A. Yashima, 2012, ISBN 978-4-87797-190-9 C3050.

Refereed Journal Articles

4. Bashar, M. Z., Elseifi, M. A., Mousa, M. R., Zhang, Z., & Gaspard, K. (2019). Optimizing the Performance of Microsurfacing Treatments in Flexible Pavements and Assessing Its Effects on Moisture Damage. Transportation Research Record. https://doi.org/10.1177/0361198118821874

5. Mousa, M., Elseifi, M. A., Bashar, M. Z., Zhang, Z., Gaspard, K. (2019).Cost Effectiveness and Optimal Timing of Crack Sealing in Asphalt Overlays, Journal of Transportation Engineering, Part B: Pavements.

6. Mousa, M., Elseifi, M. A., Bashar, M. Z., Zhang, Z., Gaspard, K. (2018). Field Evaluation and Cost-Effectiveness of Crack Sealing in Flexible and Composite Pavements, Transportation Research Record: Journal of the Transportation Research Board, Washington, D.C., https://doi.org/10.1177/03611981187674

7. Bashar, M. Z. I., Karim, M. R., Imteaz, M. A. (2018). Reliability and economic analysis of urban rainwater harvesting: A comparative study within six major cities of Bangladesh, Resources, Conservation and Recycling, Volume 133, Pages 146-154, ISSN 0921-3449, https://doi.org/10.1016/j.resconrec.2018.01.025 

8. Sadeek, S. N., Chowdhury, M. T., Rifaat, S. M., Shaheduzzaman, M., Nayem (2018). Analysis of Speed Variations at School Zones in Bangladesh. Journal of Modern Science and Technology 6 (3), 1- 12.(Peer Reviewed).

9. Anik, M. A. H., Ahmed, F., Atin, F. N., Ahmed, N. T., Mutsuddy, A., Imran, M. A., Haque, N., Zihan, T., Rayhan, R., 2018, Motivating Factors for Private Car Users to Use Public Transport, International Journal for Traffic and Transport Engineering (IJTTE), ISSN 2217-5652, Volume 8, Issue 1, Pages: 82-98, DOI: 10.7708/ijtte.2018.8(1).06

10. Anik, M. A. H., Shishir, A. R., Islam, P., Naila, S. N., Chowdhury, I. M., 2018, Sustainable Solid Waste Management Through 3R Strategy in Gazipur City, International Journal of Environment and Waste Management, ISSN 1478-9868, Volume 22, Nos. 1/2/3/4, Pages: 228-238, DOI: 10.1504/IJEWM.2018.10014719

11. T.U. Mohammed, H.K. Das, A.H. Mahmood,  M.N. Rahman, M.A. Awal,  Flexural performance of RC beam made with recycled brick aggregate, Construction and Building Materials 134C (2017) 67–74. doi:10.1016/ j.conbuildmat.2016.12.135.

12. Mohammed, T. U., Ahmed, T., Apurbo, S. M., Mallick, T. A., Shahriar, F., Munim, A., Awal, M. A., 2017. Influence of Chemical Admixtures on Fresh and Hardened Properties of Prolonged Mixed Concrete. Advances in Materials Science and Engineering, Vol. 2017, Article ID 9187627, 11 Pages. https://doi.org/10.1155/2017/9187627

13. Md. Rezaul Karim, Megumi Kuraoka, Takaya Higuchi, Masahiko Sekine and Tsuyoshi Imai (2017). Assessment of Heavy Metal Contamination from Municipal Solid Waste Open Dumping Sites in Bangladesh, International Journal of Environment and Waste Management, Inderscience Publisher (in-presss).

14. Mohammed, T. U., Das, H. K., Mahmood, A. H., Awal, M. A., and Rahman, N. (2017). “Flexural Performance of RC Beams Made with Recycled Brick Aggregate”, Construction and Building Materials, Elsevier, Volume 134, pp. 67-74, http://dx.doi.org/10.1016/j.conbuildmat.2016.12.135.

15. Mohammed, T. U., Mahmood, A. H., Kamal, M. R. I., Yashin, S. M., Zihan, Z. U. A. (2017). “Effect of Maximum Size of Brick Aggregate on Properties of Concrete”, Construction and Building Materials, Elsevier, Volume 134, pp. 713-726, DOI: 10.1016/j.conbuildmat.2016.12.164.

16. Rifaat, S. M., Tay, R, Raihan, S. M., Fahim, A., Touhidduzzaman (2017). Vehicle-Pedestrian crashes at Intersections in Dhaka city. The Open Transportation Journal, Vol. 11, P. P. 11-19.(SCOPUS Indexed Journal)

17. Anik, M. A. H., Shahriar, G., Ahmed, M., Naila S. N., 2017, Assessing Campus Sustainability Attributes Of Islamic University Of Technology (IUT), International Journal of Scientific and Engineering Research (IJSER), ISSN 2229-5518, Volume 8, Issue 7, Pages: 697-709

18. T.U. Mohammed, M.N. Rahman, Effect of types of aggregate and sand-to-aggregate volume ratio on UPV in concrete, Constr. Build. Mater. 125 (2016) 832–841. doi: https://doi.org/10.1016/j.conbuildmat.2016.08.102.

19. Pasha, M. M., Rifaat, S. M., Tay, R., DeBarros, A.(2016). Effects of Street Pattern, Traffic, Road Infrastructure, Socioeconomic and Demographic Characteristics on Public Transit Ridership. KSCE Journal of Civil Engineering, Vol. 20(3), pp. 1017- 1022. (ISI and SCOPUS Indexed, Impact Factor = 0.60)

20. Pasha, M., Rifaat, S. M., Tay, R., De Barros, A. (2016). Pasha, M., Rifaat, S. M., Tay, R., De Barros, A. (2016). Urban design and planning influences on the share of trips taken by cycling .Jurnal of Urban Design, Vol . 21, No . 4, pp. 471–480.(SCOPUS Indexed Journal)

21. Rezaul Karim, Sadik Rahman, Md. Asif Hossain, Md. Atikul Islam, Shamsul Gafur Mahmud and Zahid Hayat Mahmud (2016). Microbiological effectiveness of mineral pot filters as household water treatment in the coastal areas of Bangladesh, article in press, Microbial Risk Analysis of Elsevier

22. Monzur Alam Imteaz, Muhammad Moniruzzaman and Md. Rezaul Karim (2016). Rainwater tank analysis tools, climate and spatial variability: A case study in Sydney, accepted for International Journal of Water of Inderscience Publishers

23. Monzur Imteaz, Ramesh Karki, Iqbal Hossain, Md. Rezaul Karim (2016). Climate and spatial variabilities of potential rainwater saving and economic benefits for Kathmandu Valley, article in press, International Journal of Hydrology Science and Technology of Inderscience Publications.

24. Md. Rezaul Karim, Sadik Rahman, Md. Asif Hossain and Mohammad Shahedur Rahman (2016). Analysis of physico-chemical and microbial quality of urban piped water supply and associated health burden in two cities in Bangladesh, Journal of Hydrology and Environment Research (JHER), 4(1), pp 25-32, Enviro Water Sydney, Australia.

25. Mohammed, T. U., Mahmood, A. H., (2016). “Effects of Maximum Aggregate Size on UPV of Brick Aggregate Concrete”, Journal of Ultrasonics, Elsevier, Vol. 69, pp. 129-136, doi:10.1016/j.ultras.2016.04.006.

26. M. M. Shah, M. R. Afzalur, M. I. Monjurul, H. M. Shahin (2016): Effectiveness of jute geotextiles in flexible pavement construction, Int. Journal of Geotechnique, Construction Materials and Environment, Vol.10(1), pp. 1644-1648.

27. F. Azam, M. S. Islam, H. M. Shahin (2016): Study on tunneling for underground metro rail system in Dhaka city, Int. Journal of Geotechnique, Construction Materials and Environment, Vol.10(2), pp. 1776-1783.

28. H. M. Shahin, T. Nakai, K. Ishii, T. Iwata, S. Kuroi (2016): Investigation of influence of tunneling on existing building and tunnel based on model tests and numerical simulations, Acta Geotechnica, DOI: 10.1007/s11440-015-0428-2.

29. T. Z. Asik, M. Rahman, S. I. Matin, H. M. Shahin. (2016): Correlation of Soil Parameters for the Proposed Dhaka - Chittagong Elevated Expressway, Proc. of the 1st Bangladesh Civil Engineering Summit, Dhaka, Bangladesh, vol. 01 , pp. GE 40-47.

30. Rifaat, S. M., Pasha, M. M., Shovon, M. H., Nafis, S. R., Limon, M. K. H. (2015). Comparative Speed Study: A Way to Improve Road Safety Condition. Journal of Engineering and Technology, Vol. 12(1), pp. 41- 50.(Peer Reviewed)

31. Pasha, M. M. ,Rifaat, S. M., Hasnat, A., Rahman, I. (2015). Pedestrian’s Behaviour on Road Crossing Facilities. JurnalTeknologi, Vol. 73(4), pp. 77- 83. (SCOPUS Indexed)

32. Md. Rezaul Karim, Mohammad Zobair Ibne Bashar and Monzur Alam Imteaz (2015). Reliability and economic analysis of urban rainwater harvesting in a megacity in Bangladesh, Resources, Conservation and Recycling, Elsevier, 104, pp 61-67.

33. Mohammed, T. U., Hamada, H., Hasnat, A., Al Mamun, M. A., (2015). “Corrosion of Steel Bars in Concrete with the Variation of Microstructure of Steel Concrete Interface”, Journal of Advanced Concrete Technology (ACT), Japan Concrete Institute (JCI), Vol. 13, pp. 230-240.

34. Mohammed, T. U., Hasnat, A., Awal, M. A., Bosunia, S. Z., (2015). “Recycling of Brick Aggregate Concrete as Coarse Aggregate”, Journal of Materials in Civil Engineering, Vol. 27, No. 7, July 2015, CID: B4014005,(doi:http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0001043.

35. Y. Yusaku, H. M. Shahin, T. Nakai, R. Sakai, Y. Yoshida (2015): Restraint effect of ground displacement by sheet pile - comparison by both model test and numerical analysis, Geotechnical Engineering Journal, vol. 10, no.1, pp. 141-155.

36. T. Nakai, H. M. Shahin, H. Kyokawa (2015): Simple Modeling of Time-Dependent Behavior for Normally Consolidated Soil to Structured Soil, Proc. of American Rock Mechanics Association, ARMA-2015, Texas, June, 15-716.

37. T. Nakai, H. M. Shahin, Y. Morikawa, S. Masuda, S. Mio (2015): Effective reinforcing method for increasing bearing capacity with geosynthetics, 15th Asian Reg. Conf. on Soil Mech. and Geotechnical Engineering, Fukuoka, November, pp. 25.

38. H. M. Shahin, T. Nakai, S. Kuroi (2015): Interaction of tunneling and existing structure considering the location of foundation, 15th Asian Reg. Conf. on Soil Mech. and Geotechnical Engineering, Fukuoka, November, pp. 528.

39. M. W. Zaman, M. Y. Rumi, M. Salequzzaman, H. M. Shahin (2015): Geotechnical hazard analysis of river embankment of Bangladesh and its protectability, 5th International Conference on Geotechnique, Construction Materials and Environment, Osaka, Japan, November.

40. Y. Yusaku, H. M. Shahin, T. Nakai (2015): Reinforcing in embankment ground subjected to repeated shear deformation, International Conference on Soft Ground Engineering (ICSGE2015), Singapore, December, Advance in Soft Ground Engineering (ICSGE2015), Singapore, December, pp. 517-526.

41. H. M. Shahin, T. Nakai, K. Okuda, M. Kato (2015): Mechanism of anchor type retaining wall in braced excavation and simulation of a field observation, 1st Int. Con. On Advances in Civil Infrastructures and Construction Materials, Dhaka, Bangladesh, December, pp. 102-111.

42. M. Emtiaz, A.S.M. Azad, H. M. Shahin (2015): Numerical analysis of a reinforced concrete slab-column connection subjected to lateral & vertical seismic loading, 1st Int. Con. On Advances in Civil Infrastructures and Construction Materials, Dhaka, Bangladesh, December, pp. 609-955.

43. Rifaat, S. M., Rahman, M. H., Mohammed, Pasha, M.(2014). Study on the Effect of Road Infrastructure, Socio-Economic and Demographic Features on Road Crashes in Bangladesh. World Academy of Science, Engineering and Technology, International Science Index 88, International Journal of Social, Management, Economics and Business Engineering , 8(4), 1159 - 1164.(Peer Reviewed)

44. Md Atikul Islam, Md. Rezaul Karim, Takaya Higuchi, Hiroyuki Sakakibara and Masahiko Sakine (2014). Comparison of the trace metal concentration of drinking water supply options in southwest coastal areas of Bangladesh, Applied Water Science, Springer Open, 4(2), pp. 183-191.

45. H. M. Shahin, T. Nakai, K. Okuda & M. Kato (2014): Mechanism of Support in Anchor Type Retaining Wall - Model Tests and Numerical Simulations -, Geotechnical Special Publication of American Society of Civil Engineers (ASCE) on Advances in Soil Dynamics and Foundation Engineering, May, vol. 240, pp. 472-481.

46. T. Nakai, H. M. Shahin, Y. Morikawa, S. Masuda & S. Mio (2014): Effect of reinforcement on bearing capacity of foundations, Geotechnical Special Publication of American Society of Civil Engineers (ASCE) on Advances in Soil Dynamics and Foundation Engineering, May, vol. 240, pp. 482-490.

47. H. M. Shahin, T. Nakai and S. Kuroi (2014): Effect of repeated shear deformation on twin tunneling – model test and finite element analysis, Proc. of the 8th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground (TC204 ISSMGE, IS-SEOUL, 2014), Korea, August, pp. 67-72.

48. T. Nakai, H. M. Shahin, K. Okuda and M. Kato (2014): Reinforcing mechanism of anchor type retaining wall – model test and numerical analysis, Proc. of the 8th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground (TC204 ISSMGE, IS-SEOUL, 2014), Korea, August, pp. 73-78.

49. T. Nakai, H. M. Shahin, M. Hinokio and H. Kyokawa (2014): Why do constitutive models using (p and q) have problems? Geomechanics from Micro to Macro, Cambridge, London, September, pp. 683-688.

50. H. M. Shahin, T. Nakai, K. Okuda and M. Kato (2014): Support mechanism of anchor type retaining wall and influence of existing structure in braced excavation, Geomechanics from Micro to Macro, Cambridge, London, September, pp. 921-926.

51. H. M. Shahin, Y. Morikawa, S. Masuda, T. Nakai & S. Mio (2014): Bearing capacity of reinforced sandy ground, Computer Methods and Recent Advances in Geomechanics (Proc. of the 14th IACMAG), Kyoto, September, pp. 935-940.

52. H. M. Shahin, S. Kuroi & T. Iwata (2014): Investigation of the influence of deep tunneling on existing building, Computer Methods and Recent Advances in Geomechanics (Proc. of the 14th IACMAG), Kyoto, September, pp. 2011-2016.

53. Y. Isobe, H. M. Shahin & T. Nakai (2014): Effectiveness of reinforcement in embankment ground subjected to repeated shear deformation, Int. Journal of Geotechnique, Construction Materials and Environment, Vol.7(2), pp. 1111-1116.

54. T. Nakai, H. M. Shahin and H. Kyokawa (2014): Simple Modeling of Time-Dependent Behavior for Structured Soils, Bifurcation and Degradation of Geomaterials in the New Millennium, Springer Series in Geomechanics and Geoengineering, December, doi 10.1007/978-3-319-13506-9_48, pp. 331-338.

55. M. S. Islam, H. M. Shahin, S. Banik, F. Azam (2014): Elasto-plastic Constitutive Model Parameters and Their Application to Bearing Capacity Estimation for Dhaka Sub-soil, Journal of Civil Engineering (IEB), Vol.42(2), pp. 171-188.

56. Wahi, R. R., Rifaat, S. M., Ahsan, N. U., Leema, F. (2013). A Study on the Effect of Licensing System upon Driver’s Attitude in Bangladesh. Brunei Darussalam Journal of Technology and Commerce. Vol. 7(1), pp. 43- 57.(Peer Reviewed)

57. Md Atikul Islam, Hiroyuki Sakakibara, Md. Rezaul Karim and Masahiko Sakine (2013). Potable Water Scarcity: Options and Issues in the Coastal Areas of Bangladesh, Journal of Water and Health, 11(3), pp 532-542, IWA Publishing.

58. Md. Rezaul Karim, Saskia Manshoven, Md. Rafizul Islam, Juan Antonio Gascon, Mikel Ibarra, Ludo Diels and Md. Mizanur Rahman (2013). Assessment of an Urban Contaminated Site from Tannery Industries in Dhaka City, Bangladesh, paper accepted for publication in the Journal of Hazardous, Toxic and Radioactive Wastes, ASCE, 17.1, pp. 52-61 (doi: 10.1061/(ASCE)HZ.2153-5515.0000139).

59. T. Konda, J. Nagaya, T. Hashimoto, H. M. Shahin and T. Nakai (2013): In-situ Measurement and Numerical Analysis on Tunnel Lining and Ground Behavior due to Shield Excavation, 3rd International Conference on Computational Methods in Tunnelling and Subsurface Engineering, Germany, April, pp. 191-202.

60. H. M. Shahin, T. Nakai and S. Kuroi (2013): Tunnel behavior subjected to repeated shear deformation – model test and finite element analysis, 3rd International Conference on Computational Methods in Tunnelling and Subsurface Engineering, Germany, April, pp. 283-292.

61. T. Nakai, H. M. Shahin, T. Iwata and S. Kuroi (2013): Influence of tunneling on nearby existing building and/or tunnel: model test and finite element analysis, 3rd International Conference on Computational Methods in Tunnelling and Subsurface Engineering, Germany, April, pp. 525-536.

62. M.S. Islam, Arifuzzaman, H. M. Shahin & S. Nasrin (2013): Effectiveness of vetiver root in embankment slope protection: Bangladesh perspective: Bangladesh perspective, International Journal of Geotechnical Engineering, Vol. 7(2), April, pp. 136-148, DOI: http://dx.doi.org/10.1179/1938636213Z.00000000023.

63. M.S. Islam & H. M. Shahin (2013): Reinforcing effect of vetiver (Vetiveria zizanioides) root in geotechnical structures - experiments and analyses, Journal of Geomechanics and Engineering, Vol. 5 (4), pp.313-329, DOI: http://dx.doi.org/10.12989/gae.2013.5.3.313.

64. T. Nakai, H. M. Shahin, M. Hinokio & H. Kyokawa (2013): Significance of tij concept in constitutive modeling of geomatrials, Proc. of the 03rd International Symposium on Computational Geomechanics Krakow, Poland, August, pp. 108-122.

65. T. Nakai, H. M. Shahin & H. Kyokawa (2013): Rational expression of time-dependent behavior from normally consolidated soil to naturally deposited soil, Proc. of the 18th International Conference on Soil Mechanics and Geotechnical Engineering (ICSMGE), Paris, France, September, pp. 255-258.

66. H. M. Shahin, T. Nakai & T. Iwata (2013): Rational interpretation of tunneling considering existing tunnel and building loads, Proc. of the 18th International Conference on Soil Mechanics and Geotechnical Engineering (ICSMGE), Paris, France, September, pp. 1773-1776.

67. H. M. Shahin, T. Nakai, K. Okuda & M. Kato (2013): Investigation of the optimal support patterns in braced excavation using ground anchors, 3rd International Conference on Geotechnique, Construction Materials and Environment, Nagoya, Japan, November, pp. 181-186.

68. S. Masuda, H. M. Shahin, T. Nakai, Y. Morikawa & S. Mio (2013): Reinforcing effect of geosynthetics on bearing capacity, 3rd International Conference on Geotechnique, Construction Materials and Environment, Nagoya, Japan, November, pp. 199-204.

69. K. Asano, H. M. Shahin, H. Kyokawa, T. Nakai & R. Ohashi (2013): Influence of the stress history on the stiffness of soil, 3rd International Conference on Geotechnique, Construction Materials and Environment, Nagoya, Japan, November, pp. 205-210.

70. M.S. Islam, B.A.M. Shariar & H. M. Shahin (2013): Study on growth of vetivar grass in tropical region for slope protection, Int. Journal of Geotechnique, Construction Materials and Environment, Vol.5(2), pp. 729-734.

71. H. M. Shahin, T. Nakai, Y. Morikawa, S. Masuda, S. Mio & H. Sugiyama (2013): Bearing capacity of reinforced ground considering fixity conditions of geosynthetics, Advance in Foundation Engineering, December, pp. 385-392.

72. Rifaat, S. M., Tay, R. and DeBarros, A. (2012). Urban Street Pattern and Pedestrian Traffic Safety, Journal of Urban Design, 17(3), pp. 337-352. (SCOPUS Indexed)

73. Rifaat, S. M., Tay, R. and DeBarros, A. (2012). Severity of Motorcycle Crashes in Calgary. Accident Analysis and Prevention, Vol. 49, pp. 44- 49.(ISI and SCOPUS Indexed, Impact Factor= 2.702)

74. H. M. Shahin, T. Nakai, F. Zhang, M. Kikumoto, F. Ito & S. Baba (2012): Investigation of failure mechanism during slope excavation and its counter-measure by elastoplastic FE analysis, Proc. of 11th Int. Sym. On Landsides, Canada, June, vol.2, pp. 1765-1771.

75. T. Yamaguchi, W. Inoue, H. M. Shahin & T. Nakai (2012): On the particle breakage of geomaterials, Proc. of the 24th Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 51-56.

76. K. Tsukamoto,M. Koike, K. Yamada,H. Kyokawa,F. Zhang, H. M. Shahin & T. Nakai (2012): Experimental investigation on the behavior of unsaturated soils at soaking, Proc. of the 24th Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 57-62.

77. K. Asano, R. Ohashi, H. M. Shahin & T. Nakai (2012): Experimental Investigation on particle size distribution shear behavior of sand, Proc. of the 24th Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 105-110.

78. S. Kuroi, H. M. Shahin, T. Nakai & T. Iwata (2012): Ground behavior during deep tunnel excavation and twin tunnel excavation, Proc. of the 24th Central Japan Geotechnical Symposium, Nagoya, Japan, August, pp. 111-118.

79. T. Nakai and H. M. Shahin (2012): Simple and unified modeling of time-dependent behavior for various geomaterials, Proc. of Int. Symposium on Constitutive Modeling of Geomaterials, China, October, pp. 617-625.

80. H. M. Shahin, T. Nakai and T. Iwata (2012): Model tests and numerical simulation on tunneling in urban area, Proc. of NFCOMGEO-VI, Japan, May, pp. 87-92.

81. T. Nakai, H. M. Shahin and T. Iwata (2012): Model test and numerical simulations of tunneling considering existing building and tunnel, Proc. of the 5th Sino-Japan Geotechnical Symposium, China, pp. 403-410.

82. H. M. Shahin, T. Nakai, Y. Yoshida and S. Mio (2012): Effective reinforcing method for increasing bearing capacity, Proc. of the 5th Sino-Japan Geotechnical Symposium, China, pp. 457-463.

Refereed Papers in Conference Proceedings

83. Dhakal, N., Bashar, M. Z., Elseifi, M. A. (2019).Guideline for detecting top-down cracks in in-place flexible pavements. Tran-SET annual conference 2019, San Antonio, Texas

84. Momen, M., Elseifi, M. A., Bashar, M. Z. (2019). Use of LTPP Data to Quantify Moisture Damage Under Crack Sealing and Surface Treatments in Asphalt Pavements. Tran-SET annual conference 2019, San Antonio, Texas

85. Anik, M. A. H., Sadeek, S. N., Hossain, M., Kabir, S., 2019, Public Participation using Social Media and Crowd Sourcing in Transportation Planning, 98th Annual Meeting of Transportation Research Board (TRB), Washington, D.C., USA

86. Bashar, M.Z., Elseifi, M.A., Mousa, M., Zhang, Z., Gaspard, K. (2018). Performance and Cost-Effectiveness of Chip Seal in Louisiana. Transportation Research Board 97th Annual Meeting, Washington, D.C.

87. Bashar, M.Z., Elseifi, M.A., Mousa, M., Zhang, Z. (2018). Non-Destruction Detection of Moisture Damage in Pavements Using Ground Penetrating Radar. 2018 Tran-SET conference, Transportation Consortium of South-Central States, New Orleans, LA.

88. Imtiyaz, M.N., Sobhan, M. G., and Hossain, M. (2018). Simulating hazardous Traffic Conditions om Urban Expressways- A Micro- Simulation Approach. ICCESD, KUET.

89. Sobhani, M. G., Azam, S., Nabi, J., and Hossain, M. (2018). A Framework for Analyzing the Competitiveness of Unconventional Modes of Transportation in Developing City. 97th Annual Meeting of Transportation Research Board (TRB), Washington, D.C., USA. 

90. Imtiyaz, M. N., Sobhani, M. G., and Hossain, M. (2018). Simulating Hazardous Traffic Conditions on Urban Expressways - A Micro-simulation Approach. 4th International Conference on Civil Engineering for Sustainable Development (ICCESD), Khulna, Bangladesh

91. Anik, M. A. H., Rashid, M. M., Ahmed, S. T., Kalam, N. B., Hossain, M., 2018, Evaluation of Public Bus Comfort Considering Socio-Economic, Demographic and Trip Attributes, 23rd International Conference of Hong Kong Society for Transportation Studies (HKSTS), Hong Kong , ISBN: 978-988-15814-7-1, Pages 159-166.

92. Anik, M. A. H., Sadeek, S. N., 2018, Effect of Road Infrastructures on the Casualty Occurrence in Bangladesh, Proceedings of the 4th International Conference on Civil Engineering for Sustainable Development, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh, ISBN : 978-984-34-3502-6.

93. Rashid, M.M., Ahmed, S. T., Kalam, N. B., Anik, M. A. H., Hossain, M., 2018, Evaluation of public bus comfort in Dhaka city, 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018) , ISBN:978-984-34-5617-5, Chittagong, Bangladesh

94. Sakib, M. R., Haque, K. A., Anik, M. A. H., Hossain, M., 2018,Comparing level of comfort for various transportation modes in Dhaka city , 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018) , ISBN:978-984-34-5617-5, Chittagong, Bangladesh

95. Ali, M.A., Ramim, S.S., Sultana, H., Removal of Arsenic from Groundwater Using Iron-Coated Jute-Mesh Structure, Proceedings of the “Fifth International Conference on Water, Energy & Environment (ICWEE 2017)”, American University of Sharjah, United Arab Emirates, Feb 28-March 2, 2017, pp 233-244. (ISBN978-9948-23-127-1)

96. Mohammed, T. U., Ahmed, T., Mallick, T. A., Shahriar, F., Munim, A., 2017. Influence of Chemical Admixtures on Fresh and Hardened Properties of Ready Mix Concrete. 1st International Conference on Engineering Research and Practice, GCSTMR, Dhaka, Bangladesh. Pages 36–41. Available in this link at ResearchGate.

97. Md. Rezaul Karim and Mohammad Zobair Ibne Bashar (2017). Study of the Reliability and Economic Analysis of Urban Rainwater Harvesting in Six Major Cities of Bangladesh, accepted for the WSTA 12th Gulf Water Conference to be held from 28-30 March, 2017, Manama,Kingdom of Bahrain.

98. Sadeek, S. N., Chowdhury, M. T., Rifaat, S. M., Shaheduzzaman, M., Nayeem, A. N. (2017). Analysis of Speed  Variations at School Zones in Bangladesh. Proceedings of Civil and Water Resources Engineering Conference, 3- 4 November 2017, BIAM Foundation, 63 Eskaton, Dhaka, Bangladesh. ISBN: 978- 1- 925488- 52- 4.

99. Sadeek, S. N.,  Pasha, M. M., Rifaat, S. M., Ferdous, S. R., and Farhad, I. A. (2018). Analysis of Speed Variations at Different Distances from a Road Crossing Facility. Paper published in the Proceedings of  39th Australasian Transport Research Forum, 27- 29 th November, Auckland, New Zealand.

100. Sobhani, M. G., Saadek, S. N., Rahman, M. N., Islam, A. and Hossain, M. (2017). Impact of Socio-economic Factors on Parking Demand in Developing Cities. 12th International Conference of Eastern Asia Society for Transportation Studies (EASTS), Ho Chi Minh City, Vietnam

101. Anik, M. A. H., Kabir, S., & Hossain, M., 2017, Social Media and Crowd Sourcing to Evaluate and Compare Priorities and Preferences for Sustainable Transportation System, Proceedings of the 1st International Conference on Engineering Research and Practice (ICERP), Global Circle for Scientific, Technological and Management Research (GCSTMR) , Dhaka, Bangladesh, ISBN: 978-0-6480147-0-6, Pages: 7-12

102. Ahmed, A.J.M.M.U, Hasan, M.T., Alam, R., Hoque, M.S. (2017) Characteristics of Fundamental Diagrams due to Shockwave by Non-lane based Heterogeneous Traffic, International Structural Engineers's Conference (ISEC-9)  doi: 10.14455/ISEC.res.2017.112 https://www.isec-society.org/ISEC_PRESS/ISEC_09/html/O-8.xml

103. T.U. Mohammed, M.N. Rahman, A.H. Mahmood, T. Hasan, S.M. Apurbo, Utilization of Steel Slag in Concrete as Coarse Aggregate, in: 4th Int. Conf. Sustain. Constr. Mater. Technol., Las Vegas, USA, 2016: p. Paper No. – S184. doi: https://doi.org/10.13140/RG.2.1.3804.4404.

104. Ramim, S.S., Sultana, H., Ali, M.A., “Effectiveness of Iron Coated Jute-Mesh Structure to Decrease Arsenic Loading to Rice Fields”, Proceedings of the “1st Bangladesh Civil Engineering Summit, 2016”, Bangladesh University of Engineering & Technology, Dhaka, 23-27 November, 2016, pp EE3-EE10. (ISBN: 978-984-34-1512-7)

105. Mohammed, T. U., Mahmood, A. H., Chowdhury, I. M., Humayun, A. M., Ahmed, T., 2016. Sustainability of Construction Materials in Bangladesh. 4th International Conference on Sustainability of Construction Materials and Technologies (SCMT4), University of Nevada, Las Vegas, USA. Paper No. S182. Available in this link at ResearchGate.

106. Md. Rezaul Karim, Md. Ashikur Rahman and Dewan Mahmud Mim (2016). Feasibility of Solar Distillation as the Household Water Supply in Coastal Areas of Bangladesh, Proceedings of World Environmental and Water Resources Congress, ASCE, pp. 30-40

107. Mohammed, T. U., Rahman, M. N., Mahmood, A. H., Hasan, T, Apurbo S. M., (2016). Utilization of Steel Slag in Concrete as Coarse Aggregate, 4th International Conference on Sustainability of Construction Materials and Technologies (SCMT4), Paper No. S184, Las Vegas, USA, August 7 – 11, 2016.

108. Rifaat, S. M., Labib, M., Mustakim, R., Monwar, M., Tay, R.(2015). Vehicle- Pedestrian Crashes at Intersections in Dhaka City. Proceedings of the Conference of ASEAN Road Safety 2015 (CARS2015), Kuala Lumpur: Malaysian Institute of Road Safety Research. pp. 274- 280.

109. Md. Rezaul Karim, Rifath Ara Rimi and Shamsul Gafur Mahmud (2015). Risk Factors Associated with Coastal Water Supply in Bangladesh, Proceeding of the 2nd IWA Malaysia YWP15 Conference, 17-20 March 2015, Kuala Lumpur, Malaysia.

110. Mohammed, T. U., and Hassan, M., (2015). Utilization of Brick Fine Aggregate in Concrete, International Conference on Regeneration and Conservation of Concrete Structures (RCCS), June 1-3, 2015, Nagasaki, Japan, CD Proceedings, Paper No. I-21, pp. 1-11.

111. Mohammed, T. U., Khan, A. Z., and Mahmood, A. H., (2015). Recycling of Demolished Concrete as Coarse and Fine Aggregate, International Conference on Regeneration and Conservation of Concrete Structures (RCCS), June 1-3, 2015, Nagasaki, Japan, CD Proceedings, Paper No. I-22, pp. 1-12.

112. T. Kinoshita, H. M. Shahin, Y. Isobe and T. Nakai (2015): Experimental Investigation on bearing capacity using geosynthetics and sheet pile, Proc. of the 50th Annual Conference of Japanese Geotechnical Society, Hokkaido, Japan, July, pp. 1647-1648.

113. Y. Isobe, T. Kinoshita, H. M. Shahin, and T. Nakai (2015): Investigation of the displacement restraint method by steel sheet pile in the ground subjected to shear deformation, Proc. of the 50th Annual Conference of Japanese Geotechnical Society, Hokkaido, Japan, July, pp. 1649-1650.

114. Mohammed, T. U., Ahmed, T., 2014. Influence of Some Factors on Workability and Compressive Strength of Ready Mix Concrete in Bangladesh. 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, Islamic University of Technology (IUT), Gazipur, Bangladesh. Pages 39–49. Available in this link at ResearchGate.

115. Bhuiyan, M. A. A., Khan, I. R., Khan, M. R. M., Rifaat, S. M. (2014). Optimizing Signal Timing : An Efficient Way to Handle Traffic Congestion in Developing Countries. Paper Published in the Proceedings of 5th Brunei International Conference on Engineering and Technology, Institut Teknologi Brunei, Brunei, November 1- 3, Paper ID_12.

116. Mohammed, T. U., and Chowdhury, I. M. (2014). Sustainable Development of Concrete Construction Materials in Bangladesh, Proceedings of the 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, December 8, 2014, IUT, Gazipur, Bangladesh, pp. 24-38.

117. Mohammed, T. U., and Ahmed, T., (2014). Influence of Some Factors on Workability and Compressive Strength of RMC in Bangladesh, Proceedings of the 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, December 8, 2014, IUT, Gazipur, Bangladesh, pp. 39-49.

118. Mohammed, T. U., Ahmed, S. S., and Pasha, M. M. (2014). Production of Clay Burnt Coarse Aggregate for Concrete, Proceedings of the 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, December 8, 2014, IUT, Gazipur, Bangladesh, pp. 91-100.

119. Mohammed, T. U., and Hasnat, A. (2014). Modulus of Rupture of Concrete Made with Recycled Brick Aggregate, Proceedings of the 6th International Conference of Asian Concrete Federation (ACF), Seoul, South Korea, September 21 – 24, 2014, pp. 1118-1123.

120. T. Yamaguchi, H. M. Shahin, H. Kyokawa & T. Nakai (2014): Compression and collapse behavior of unsaturated soil under 1D condition and its analysis, Proc. of the 8th conference of the Japan Society of Material Science Tokai Branch, Nagoya, Japan, March, pp. 59-61.

121. K. Asano, H. M. Shahin, H. Kyokawa & T. Nakai (2014): Introduction of rotational hardening rule in subloading tij model, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 421-422.

122. K. Asano, S. Kobayashi, H. M. Shahin and T. Nakai (2014): Influence of the stress history on the stress-dilatancy characteristic and the stiffness of soil, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 425-426.

123. S. Masuda, R. Suzuki, Y. Morikawa, H. M. Shahin, T. Nakai and S. Mio (2014): Reinforcing effect of geosynthetics on bearing capacity - 2D model tests and numerical simulations, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 561-562.

124. Y. Morikawa, S. Masuda, R. Suzuki, H. M. Shahin, T. Nakai and S. Mio (2014): Reinforcing effect of geosynthetics on bearing capacity - Centrifuge model tests and 3D numerical simulations, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 563-564.

125. T. Yamaguchi, S. Kanno, H. M. Shahin, H. Kyokawa, T. Nakai (2014): Investigation of effective stress of unsaturated soil and application of its results to constitutive modeling, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 705-706.

126. S. Kuroi, D. Takeichi, H. M. Shahin and T. Nakai (2014): Earth pressure of tunnel due to repeated sheer deformation, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 1289-1290.

127. H. M. Shahin, S. Kuroi, D. Takeichi and T. Nakai (2014): Effect of repeated shear deformation on tunnel earth pressure – model test and numerical analysis, Proc. of the 49th Japan national conference on geotechnical engineering, Kita Kyushu, Japan, July, pp. 1931-1932.

128. Rahman, M. H., Mohammed, Rifaat, S. M., Pasha, M(2013). A Study on the effect of road infrastructure, socio-economic and demographic features on road crashes in Bangladesh. Paper published in the Proceedings of 8th CUTSE International Conference on Sience, Sustainability and Solutions, 3-4 December, 2013, Curtin University Sarawak, Malaysia , page 87- 96

129. Pasha, M., Hasanat, A., Rahman, I., Rifaat, S. M.(2013). A Study on Pedestrians’ Behavior of Using Road Crossing Facilities in Dhaka City. Joint conference of The 9th International Conference on Geo-technical & Transportation Engineering (GEOTROPIKA) and The 1st International Conference on Construction and Building Engineering (ICONBUILD), Johor Bahru, Malaysia, 28th – 30th October 2013, Paper ID_181.

130. Md. Rezaul Karim, Rifath Ara Rimi and Md. Solaiman Billah (2013). Reliability analysis of household rainwater harvesting tanks in the coastal areas of Bangladesh using daily water balance model, Proceedings of the 20th International Congress on Modeling and Simulation (MODSIM 2013), Adelaide, South Australia 1-6 December, 2013, pp. 2639-2645.

131. Md. Atai Rabbi, Md. Tareq Rahman, Md. Rezaul Karim and Fuad Mohammad Moinul Haque (2013). Water Uses Pattern in Urban Slum, Proceeding of International Conference on Civil, Biology and Environmental Engineering (CBEE-2013), 21-22 November, 2013, Bangkok, Thailand.

132. Mohammed, T. U., Hasnat, A., Awal, M. A., and Shamim Z. Bosunia (2013). Recycling of Brick Aggregate Concrete: Physical and Mechanical Properties, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18 ~ 21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 202.

133. Mohammed, T. U., Hasnat, A., Awal, M. A., , and Shamim Z. Bosunia (2013). Recycling of Brick Aggregate Concrete: An Extended Study on Some Key Issues, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 203.

134. Mohammed, T. U., (2013). Sustainable Development of Concrete Construction Works in Bangladesh, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 205.

135. Mohammed, T. U., Hamada, H., Mamun, A. A., and Hasnat, A., (2013). Corrosion of Cement Paste Coated Steel Bars in Marine Environment, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 206.

136. Mohammed, T. U., Mohammad, N. I., Sutradhar, S. K., Chowdhury, M. H. R., Hasnat, A, Khatib, J. M., (2013). Carbonation Coefficient of Concrete in Dhaka City, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 208.

137. R. Ohashi, K. Asano, H. M. Shahin, T. Nakai & H. Kyokawa (2013): Experimental investigation of the Development of Stress Induced Anisotropy and its Dissipation in Sand, Proc. of the 7th conference of the Japan Society of Material Science Tokai Branch, Nagoya, Japan, March, pp. 71-72.

138. K. Tsukamoto, T. Yamaguchi, F. Zhang, H. M. Shahin and T. Nakai (2013): Consideration of net stress and effective stress in unsaturated soils based on triaxial tests, Proc. of the 21st Central Japan JSCE conference (CD-ROM), Japan, March, III-4.

139. R. Ohashi, K. Asano, H. M. Shahin and T. Nakai (2013): Strain stabilization during cyclic loading under drained and undrained tests, Proc. of the 21st Central Japan JSCE conference (CD-ROM), Japan, March, III-20.

140. S. Kuroi, H. M. Shahin and T. Nakai (2013): Earth pressure at tunnel due to repeated shear deformation, Proc. of the 21st Central Japan JSCE conference (CD-ROM), Japan, March, III-24.

141. R. Ohashi, K. Asano, H. M. Shahin and T. Nakai and H. Kyokawa (2013): Extension of isotropic hardening constitutive model considering the stabilization of stress-strain behavior under cyclic loading, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 555-556.

142. K. Asano, R. Ohashi, H. M. Shahin and T. Nakai (2013): Influence of the stress history on the stress-dilatancy characteristic and the stiffness of soil, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 559-560.

143. T. Yamaguchi, K. Tsukamoto, H. M. Shahin, T. Nakai and F. Zhang (2013): Consideration of net stress and effective stress in the modeling of unsaturated soil, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 839-840.

144. K. Tsukamoto, T. Yamaguchi, H. M. Shahin and T. Nakai (2013): Modeling of the mechanical behavior of unsaturated soils using bonding effect, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 841-842.

145. K. Okuda,T. Fukuoka,H. M. Shahin and T. Nakai (2013): Investigation of optimum anchor length and embedded length in ground anchors for earth retaining excavation, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 1433-1434.

146. T. Konda, T. Hashimoto, J. Nagaya, H. M. Shahin and T. Nakai (2013): Numerical Analysis on Tunnel Lining and Ground Behavior due to Shield Excavation, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 1475-1476.

147. H. M. Shahin, T. Nakai and S. Kuroi (2013): Effect of repeated shear deformation on tunnel earth pressure – model test and numerical analysis, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 1499-1500.

148. S. Kuroi, H. M. Shahin and T. Nakai (2013): Model tests and numerical simulations of tunnel excavation in deep underground considering existing structure, Proc. of the 48th Japan national conference on geotechnical engineering, Toyama, Japan, July, pp. 1501-1502.

149. Hasib, A.A, Zaman, M.S., Arin, M. I., Rifaat, S. M. and Al-Amin, M.(2012). A study on the students' perception of pedestrian risk. Published in the proceedings of the 2nd International Conference on Environmental Technology and Construction Engineering for Sustainable Development, March 10-12, Sylhet, Bangladesh.pp. 513- 516.

150. Md. Rezaul Karim and Nujjat Jahan (2012). Establishment of BOD and COD Relationship of Different Wastewater, Proceedings of the 1st International Conference on Civil Engineering for Sustainable Development (ICCESD-2012), 2 to 3 March 2012, KUET, Khulna, Bangladesh.

151. Mohammed, T. U., Hasan, P., Islam, B. K. M. A., Hasnat, A., Sharkia, S., (2012). Investigation on Different Cement Brands Commonly Used in Bangladesh, Proceedings of the Third International Conference on Construction in Developing Countries, ICCIDC III, pp. 554-559, July 4 – 6, 2012, Thailand.

152. Hasnat, A., Mohammed, T. U., Hossain, M. N., Rahman, N., Hamada, H., (2012). Investigation on Pervious Concrete Made with Locally Available Materials, Proceedings of the Third International Conference on Construction in Developing Countries, ICCIDC III, pp. 548-553, July 4 – 6, 2012, Thailand.

153. Sarwar, N., Mohammed, T. U., Bosunia, S. Z., Khatib, J., (2012). Development of High Strength Concrete in Bangladesh, Proceedings of the Third International Conference on Construction in Developing Countries, ICCIDC III, pp. 560-566, July 4 – 6, 2012, Thailand.

154. H. M. Shahin, T. Nakai, M. Kikumoto and H. Yamazaki (2012): Settlement analyses of clays considering soil-water coupling and creep characteristics, Proc. of the 61st National Congress of Theoretical and Applied Mechanics, Tokyo, Japan, March, OS05-06.

155. T. Nakai, H. M. Shahin, M. Kikumoto and H. Kyokawa (2012): Description of time-dependent behavior of soils using subloading surface concept, Proc. of the 61st National Congress of Theoretical and Applied Mechanics, Tokyo, Japan, March, OS11-14.

156. T. Iwata, T. Nakai, H. M. Shahin and S. Kuroi (2012): Model tests and numerical simulations on new tunnel excavation considering the effect of flat foundation, Proc. of the 20th Central Japan JSCE conference (CD-ROM), Japan, March, III

157. Y. Yoshida, T. Nakai, H. M. Shahin, Kanou, I. Saito, N. Nagao, K. Toda (2012): Investigation of reinforcing ground using steel sheet pile and nailing - numerical analyses, Proc. of the 20th Central Japan JSCE conference (CD-ROM), Japan, March, II.

158. R. Ohashi, K. Asano, T. Nakai, M. Kikumoto and H. M. Shahin (2012): Influence of grain size distribution on shear behavior of sand, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 339-340.

159. T. Okuno, A. Nakaya, T. Nakai, H. M. Shahin (2012): Numerical simulation on shear band formation of Kazusa Group mudstone under loading of triaxial compression test, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 441-442.

160. W. Inoue, T. Yamaguchi, T. Nakai, H. M. Shahin, M. Kikumoto (2012): Experiment and analysis on the characteristic of breakage for geomaterials, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 475-476.

161. K. Tsukamoto, M. Koike, K. Yamada, M. Kikumoto, T. Nakai, H. M. Shahin (2012): Experiment of shearing behavior at soaking and after soaking on unsaturated soils, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 659-660.

162. M. Koike,K. Tsukamoto, K. Yamada,M. Kikumoto,T. Nakai,H. M. Shahin (2012): Simulation of shearing behavior at soaking and after soaking on unsaturated soils, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 661-662.

163. Y. Yoshida, T. Nakai, H. M. Shahin and Y. Kando, N. Nagao, K. Toda and I. Saito (2012): Investigation of reinforcing method of embankment ground using steel sheet pile in clay ground - numerical analyses, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1003-1004.

164. T. Nakai, H. M. Shahin, Y. Yoshida and S. Mio (2012): Effective method for increasing bearing capacity with geosynthetics – discussion based on model tests, numerical simulations and fields, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1025-1026.

165. Masuda, M. Kikumoto, H. M. Shahin, T. Nakai (2012): Effectiveness of ground anchorages in settlement of shallow foundation, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1027-1028.

166. K. Okuda, M. Kato, K. Okada, T. Nakai, H. M. Shahin, M. Kikumoto (2012): Investigation of the optimal support patterns in ground anchors for earth retaining excavation - model experiment and numerical analyses, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1221-1222.

167. M. Kato, H. M. Shahin, T. Nakai, M. Kikumoto, T. Konda, H. Ito (2012): Elasto-plastic finite element analyses of earth retaining excavation with anchors, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1223-1224.

168. T. Iwata, S. Kuroi, T. Nakai, H. M. Shahin (2012): Model tests and numerical simulation of twin tunnel excavation considering excavation sequence, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1257-1258.

169. H. M. Shahin, T. Nakai, T. Iwata, S. Kuroi (2012): Model tests and numerical simulations of tunneling in deep underground considering existing structure, Proc. of the 47th Japan national conference on geotechnical engineering, Hachinohe, Japan, July, pp. 1259-1260.

170. K. Okuda , H. M. Shahin, T. Nakai, M. Kato & Okada (2012): 既設構造物近くでのグラウンドアンカー式山留め掘削の合理的な支保パターン, Proc. of the 67th conference of the Japan Society of Civil Engineers (JSCE), Nagoya, Japan, September, (CD-ROM).

171. Yamazaki, H. M. Shahin & T. Nakai (2012): Deformation analysis considering structured and time dependent behavior of soils, Proc. of the 67th conference of the Japan Society of Civil Engineers (JSCE), Nagoya, Japan, September, (CD-ROM).

172. R. Ohashi, T. Nakai, H. M. Shahin & H. Kyokawa (2012): 砂の誘導異方性に関する実験的検討, Proc. of the 67th conference of the Japan Society of Civil Engineers (JSCE), Nagoya, Japan, September, (CD-ROM).

Workings Papers, Reports & Other Publications

173. Sadeek, S.N., Ahmed, A.J.M.M.U., Hossain, M., Hanaoka, S. (2018) Effect of Land Use and Road Network on Crime, Transportation Research Board 97th Annual Meeting Location: Washington DC, United States https://trid.trb.org/view/1497084

174. Utilization of steel slag in concrete as coarse and fine aggregate (Sponsor : Bangladesh Steel Re-Rolling Mills Limited)

175. Fresh and hardened properties of concrete made with different chemical admixtures (Sponsor: The Structural Engineers Limited)

176. Shear behavior of RC beams made with recycled brick aggregate

177. Durability of concrete made with different aggregates commonly used in Bangladesh

178. Sobhani, M. G., Imtiyaz, M. N., Azam, M. S. and Hossain, M. (2017). Impacts of Climate Change and Relevant Adaptation-Mitigation Strategies for Transportation Infrastructure in Coastal Zones- Bangladesh’s Case. International Conference on Climate Change and Sustainable Development through Digitalisation (ICSDD), Dhaka, Bangladesh